With flat back faces - Jtekt North America

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25

		LINA Bill of material	DESIGNATION Bearing Designation ⁿ/ₐ	SD SD - Shaft Dia. [mm]	D D - Outside Diameter [mm]	D1 D1 - Outside Diameter [mm]	T T - Bearing Width [mm]	R r - Radius [mm]	SD1 SD1 - Inside Diameter [mm]	CR C - Basic Dynamic Load Rating [kN]	CO C0 - Basic Static Load Rating [kN]	CU Cu - Fatigue Load Limit [kN]	NG Limiting Speed (Grease) [rpm]	NO Limiting Speed (Oil) [rpm]

		51100	51100	10	24	24	9	0.3	11	12.5	14.0	0.630	6500	10000
		51200	51200	10	26	26	11	0.6	12	15.8	17.1	0.770	5700	8800
		51101	51101	12	26	26	9	0.3	13	12.9	14.0	0.690	6500	10000
		51201	51201	12	28	28	11	0.6	14	16.5	19.0	0.860	5400	8300
		51102	51102	15	28	28	9	0.3	16	13.2	15.4	0.760	6100	9400
		51202	51202	15	32	32	12	0.6	17	20.8	24.8	1.10	4900	7500
		51103	51103	17	30	30	9	0.3	18	13.5	18.2	0.820	6100	9400
		51203	51203	17	35	35	12	0.6	19	21.5	27.3	1.25	4900	7500
		51104	51104	20	35	35	10	0.3	21	17.8	24.7	1.10	5100	7900
		51204	51204	20	40	40	14	0.6	22	27.9	37.7	1.70	3900	6000
		51105	51105	25	42	42	11	0.6	26	24.4	37.2	1.70	4400	6800
		51205	51205	25	47	47	15	0.6	27	34.6	50.4	2.30	3600	5500
		51305	51305	25	52	52	18	1.0	27	44.7	61.4	2.75	3100	4800
		51405	51405	25	60	60	24	1.0	27	69.5	89.4	4.05	2600	4000
		51106	51106	30	47	47	11	0.6	32	25.5	42.2	1.90	4300	6600
		51206	51206	30	52	52	16	0.6	32	36.7	58.2	2.65	3400	5200
		51306	51306	30	60	60	21	1.0	32	53.5	78.7	3.55	2700	4200
		51406	51406	30	70	70	28	1.0	32	91.0	126	5.70	2200	3400
		51107	51107	35	52	52	12	0.6	37	25.5	47.2	2.00	3900	6000
		51207	51207	35	62	62	18	1.0	37	48.9	78.2	3.55	2900	4500
		51307	51307	35	68	68	24	1.0	37	69.3	105	4.75	2400	3700
		51407	51407	35	80	80	32	1.1	37	109	155	7.00	1900	2900
		51108	51108	40	60	60	13	0.6	42	33.6	62.8	2.85	3400	5300
		51208	51208	40	68	68	19	1.0	42	58.7	98.3	4.45	2700	4200
		51308	51308	40	78	78	26	1.0	42	86.6	135	6.05	2100	3300

Additional Information

Users who viewed this, were also interested in

Jtekt North America

NFJtekt North America 13.12.2018

TSS Type TRA (DIN 3760 Type A) - Radial Oil Seal TRA

TSS Type TRA (DIN 3760 Type A) - Radial Oil Seal TRATrelleborg 02.02.2018

DIN 934-SKM-STVZ-A2-A4 - Hexagon Nuts DIN 934, right hand

DIN 934-SKM-STVZ-A2-A4 - Hexagon Nuts DIN 934, right handMÄDLER 10.04.2024

Jtekt North America

Open typeJtekt North America 13.12.2018

Jtekt North America

Shielded ZZ, ZZX

Shielded ZZ, ZZXJtekt North America 13.12.2018

JTEKT Corporation(Koyo)

Open typeJTEKT Corporation(Koyo) 16.01.2019

JTEKT Corporation(Koyo)

With flat back faces

With flat back facesJTEKT Corporation(Koyo) 16.01.2019

C-AN - Economy Lock Nuts - AN Type

C-AN - Economy Lock Nuts - AN TypeMisumi 29.05.2023

NSK Rolling Bearing

With Flat SeetNSK Rolling Bearing 15.11.2023

NTN Corporation

Single Direction Type

Single Direction TypeNTN Corporation 17.10.2023

BD1_001_BDC_001 - Thrust ball bearings, single direction

BD1_001_BDC_001 - Thrust ball bearings, single directionSKF 31.05.2024

Jtekt North America

Metric seriesJtekt North America 13.12.2018

Nachi-Fujikoshi

Series 51Nachi-Fujikoshi 07.02.2019

IKO (NIPPON THOMPSON CO.,LTD)

Thrust Roller Bearings-with Rings (AZ)

Thrust Roller Bearings-with Rings (AZ)IKO (NIPPON THOMPSON CO.,LTD) 21.06.2020