SCHP - Metric - Carl Hirschmann

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8

		LINA Lista de materiales	TYPE Series SCHP ⁿ/ₐ	MATERIAL1 Outer part material ⁿ/ₐ	MATERIAL2 Inner part material ⁿ/ₐ	D d H7 [mm]	DD D1 h6 [mm]	B B 0/-0.12 [mm]	C C 0/-0.2 [mm]	D1 d1 [mm]	K Ball Ø [mm]	MAXALPHA max. Angle of misalignment [°]	WEIGHT Weight [g]	SLR Static load Co [kN]	OM Tilting moment [Nm]

		SCHP6	6	1.4305 (stainless steel)	1.4034 (hardened stainles...	6	16	9.0	6.75	8.9	12.700	13	10	23	0.025 - 0.16
		SCHP8	8	1.4305 (stainless steel)	1.4034 (hardened stainles...	8	19	12.0	9.00	10.4	15.875	13	15	40	0.1 - 0.33
		SCHP10	10	1.4305 (stainless steel)	1.4034 (hardened stainles...	10	22	14.0	10.50	12.9	19.050	13	25	58	0.25 - 0.5
		SCHP12	12	1.4305 (stainless steel)	1.4034 (hardened stainles...	12	26	16.0	12.00	15.4	22.225	13	55	79	0.5 - 0.66
		SCHP14	14	1.4305 (stainless steel)	1.4034 (hardened stainles...	14	29	19.0	13.50	16.8	25.400	15	70	105	0.75 - 1.0
		SCHP16	16	1.4305 (stainless steel)	1.4034 (hardened stainles...	16	32	21.0	15.00	19.3	28.575	15	85	130	0.75 - 1.2
		SCHP18	18	1.4305 (stainless steel)	1.4034 (hardened stainles...	18	35	23.0	16.50	21.8	31.750	15	100	161	1.0 - 1.66
		SCHP20	20	1.4305 (stainless steel)	1.4034 (hardened stainles...	20	40	25.0	18.00	24.3	34.925	15	160	193	1.5 - 2.0