$ {catalogItem}-$ {catalogLabel}

??

CAD모델 선택

	1
	2
	3
	4
	5
	6

		LINA BOM	SIZE Size ⁿ/ₐ	L1 Length [mm]	D Outer Diameter [mm]	D3 Hub Diameter [mm]	S Disengagement Travel [mm]	F Screw (ISO 4762) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm²]	KR Misalignment radial max. [mm]	KA Misalignment axial max. [mm]	KW Misalignment angular max. [°]	T Torque 98 ShA [Nm]	RPM Speed max. [1/min]

		KBK/EAP-14-63-6-N6-3Nm-C-...	14	32	49	30	0.7	M3	1.34	0.26	0.6	0.09	+1.0/-0.5	0.9	12.5	11690
		KBK/EAP-19-81-10-N10-5Nm-...	19	41	64	40	1.2	M4	2.90	0.71	2.9	0.06	+1.2/-0.5	0.9	17.0	8950
		KBK/EAP-24-98.5-15-N15-12...	24	48	79	55	1.2	M5	6.00	1.45	8.9	0.10	+1.4/-0.5	0.9	60.0	7630
		KBK/EAP-28-121-19-N19-50N...	28	59	94	65	2.0	M5	6.00	2.40	21.0	0.11	+.1.5/-0.7	0.9	160.0	6030
		KBK/EAP-38-135-20-N20-60N...	38	69	119	80	2.0	M6	10.00	4.60	69.0	0.12	+1.8/-0.7	0.9	325.0	4980
		KBK/EAP-42-157-28-N20-80N...	42	76	129	95	2.0	M8	35.00	8.90	158.0	0.14	+2.0/-1.0	0.9	450.0	4440

추가 정보

이 사용자는 또한에 관심이있는 사용자를 보았습니다.

DryLin® SHT - Basic

DryLin® SHT - Basicigus 12.09.2022

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WKM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

KBK Antriebstechnik

KBK/LL-P - Safety Coupling with Keyway

KBK/LL-P - Safety Coupling with KeywayKBK Antriebstechnik 26.11.2019

KBK Antriebstechnik

KBK/EPA - Safety Coupling with Keyway and Outer Cone

KBK/EPA - Safety Coupling with Keyway and Outer ConeKBK Antriebstechnik 26.11.2019

drylin® GRW-0630 - drylin® E Linear Axes with Motor

drylin® GRW-0630 - drylin® E Linear Axes with Motorigus 12.09.2022

GSQ - Linear Axes with Motor

GSQ - Linear Axes with Motorigus 13.09.2022

KARM - Metric sizes, right-hand thread

KARM - Metric sizes, right-hand threadigus 19.01.2021

KGLI - Inch sizes

KGLI - Inch sizesigus 19.01.2021

KBRI - Inch sizes, right-hand thread

KBRI - Inch sizes, right-hand threadigus 19.01.2021

DryLin® SLWE-PL - preload

DryLin® SLWE-PL - preloadigus 12.09.2022

REM - Metric sizes, Low Cost – iglidur® R; low friction values

REM - Metric sizes, Low Cost – iglidur® R; low friction valuesigus 19.01.2021

DryLin® ZLW 1040 - Belt Drive

DryLin® ZLW 1040 - Belt Driveigus 12.09.2022

WEM - Metric sizes, Standard – iglidur® W300; extreme wear resistance

WEM - Metric sizes, Standard – iglidur® W300; extreme wear resistanceigus 19.01.2021

N 80 - Low-Profile Linear Guideigus 08.09.2022