KBK/CA - Safety Coupling with with Outer Cone - KBK Antriebstechnik

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8

		LINA Lista de materiales	SIZE Size ⁿ/ₐ	L Length (±1) [mm]	L3 Length [mm]	D Outer Diameter [mm]	D3 Centering Diameter(g6) [mm]	D4 Pitch Circle Diameter [mm]	D5 Flange Diameter [mm]	S Disengagement Travel [mm]	IG Thread(6x) ⁿ/ₐ	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm^2]	RPM Speed max. [1/min]

		KBK/CA-10-5-3Nm-C-1	10	46	8	49	24	30	47	0.7	M3	M3	2.1	0.18	0.4	12000
		KBK/CA-30-12-5Nm-C-1	30	54	9	64	30	46	60	1.2	M4	M5	6.0	0.53	2.2	9400
		KBK/CA-60-15-13Nm-C-1	60	69	16	79	36	50	75	1.2	M5	M5	8.5	1.00	6.1	7800
		KBK/CA-80-20-15Nm-C-1	80	80	22	94	48	65	90	2.0	M6	M6	14.0	1.80	16.0	6400
		KBK/CA-150-20-50Nm-C-1	150	80	22	94	48	65	90	2.0	M6	M6	14.0	1.80	16.0	5500
		KBK/CA-200-20-30Nm-C-1	200	85	25	109	52	70	105	2.0	M6	M6	14.0	2.00	24.0	5500
		KBK/CA-300-25-60Nm-C-1	300	101	31	119	58	76	115	2.0	M8	M8	20.0	3.20	47.0	5000
		KBK/CA-500-35-80Nm-C-1	500	126	33	129	66	110	125	2.0	M8	M8	26.0	4.70	84.0	4500

Additional Information

Los usuarios que vieron esto, también se interesaron en

DryLin® SAW - Linear axis

DryLin® SAW - Linear axisigus 12.09.2022

KSTI - Inch sizes

KSTI - Inch sizesigus 19.01.2021

STZ-Q10-01-XX - Crossbars made of plastic

STZ-Q10-01-XX - Crossbars made of plasticigus 01.05.2020

KBLM - Metric sizes, left-hand thread

KBLM - Metric sizes, left-hand threadigus 19.01.2021

DryLin® ZAW - Extension Arm Drive

DryLin® ZAW - Extension Arm Driveigus 12.09.2022

DryLin® SLN - Low profile linear axis with motorigus 12.09.2022

TAF - Shaft End Support, fixed, mm

TAF - Shaft End Support, fixed, mmigus 12.09.2022

STZ-Q10-01-AC-E2 - Connection for e-chain

STZ-Q10-01-AC-E2 - Connection for e-chainigus 01.05.2020

QJFM - Flange pillow block

QJFM - Flange pillow blockigus 20.07.2021

N 40 - Low-Profile Linear Guideigus 08.09.2022

SLS - Lead screw support blocks

SLS - Lead screw support blocksigus 13.09.2022

KGLM LC - Metric sizes, Low-Cost

KGLM LC - Metric sizes, Low-Costigus 20.07.2021

FJUMT-02 - Tandem Flange, square, mm

FJUMT-02 - Tandem Flange, square, mmigus 12.09.2022

GERMF - Metric sizes, right-hand thread, with Spring-Loaded-Pins

GERMF - Metric sizes, right-hand thread, with Spring-Loaded-Pinsigus 19.01.2021