KBK/CA - Safety Coupling with with Outer Cone - KBK Antriebstechnik

Selección de modelo CAD

	1
	2
	3
	4
	5
	6
	7
	8

		LINA Lista de materiales	SIZE Size ⁿ/ₐ	L Length (±1) [mm]	L3 Length [mm]	D Outer Diameter [mm]	D3 Centering Diameter(g6) [mm]	D4 Pitch Circle Diameter [mm]	D5 Flange Diameter [mm]	S Disengagement Travel [mm]	IG Thread(6x) ⁿ/ₐ	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm^2]	RPM Speed max. [1/min]

		KBK/CA-10-5-3Nm-C-1	10	46	8	49	24	30	47	0.7	M3	M3	2.1	0.18	0.4	12000
		KBK/CA-30-12-5Nm-C-1	30	54	9	64	30	46	60	1.2	M4	M5	6.0	0.53	2.2	9400
		KBK/CA-60-15-13Nm-C-1	60	69	16	79	36	50	75	1.2	M5	M5	8.5	1.00	6.1	7800
		KBK/CA-80-20-15Nm-C-1	80	80	22	94	48	65	90	2.0	M6	M6	14.0	1.80	16.0	6400
		KBK/CA-150-20-50Nm-C-1	150	80	22	94	48	65	90	2.0	M6	M6	14.0	1.80	16.0	5500
		KBK/CA-200-20-30Nm-C-1	200	85	25	109	52	70	105	2.0	M6	M6	14.0	2.00	24.0	5500
		KBK/CA-300-25-60Nm-C-1	300	101	31	119	58	76	115	2.0	M8	M8	20.0	3.20	47.0	5000
		KBK/CA-500-35-80Nm-C-1	500	126	33	129	66	110	125	2.0	M8	M8	26.0	4.70	84.0	4500

Additional Information

Los usuarios que vieron esto, también se interesaron en

EALM HT - Metric sizes, left-hand thread, High Temperature

EALM HT - Metric sizes, left-hand thread, High Temperatureigus 19.01.2021

KARM CL - Metric sizes, right-hand thread, 2. Generation

KARM CL - Metric sizes, right-hand thread, 2. Generationigus 19.01.2021

BM4 - Bridge Modules with toothed belt drive

BM4 - Bridge Modules with toothed belt driveLine Tech 30.01.2023

KGLM LC - Metric sizes, Low-Cost

KGLM LC - Metric sizes, Low-Costigus 20.07.2021

GERMF - Metric sizes, right-hand thread, with Spring-Loaded-Pins

GERMF - Metric sizes, right-hand thread, with Spring-Loaded-Pinsigus 19.01.2021

Sumitomo Heavy Industries, Ltd. PTC Group

Induction motors

Induction motorsSumitomo Heavy Industries, Ltd. PTC Group 07.12.2023

DDF-8 - Drehdurchführungen dienen als Verbindung zwischen feststehenden und rotierenden Maschinen-Elementen.

DDF-8 - Drehdurchführungen dienen als Verbindung zwischen feststehenden und...Konstandin 21.08.2013

GERM - Metric sizes, right-hand thread

GERM - Metric sizes, right-hand threadigus 19.01.2021

EFOM - Metric sizes, with 2 Mounting Holes

EFOM - Metric sizes, with 2 Mounting Holesigus 19.01.2021

KGLM SL - Metric sizes, Slim Line

KGLM SL - Metric sizes, Slim Lineigus 19.01.2021

KCLM - Metric sizes, right-hand thread

KCLM - Metric sizes, right-hand threadigus 20.07.2021

KSTI - Inch sizes

KSTI - Inch sizesigus 19.01.2021

SAM - Metric sizes

SAM - Metric sizesigus 20.07.2021

EBRI - Inch sizes, right-hand thread

EBRI - Inch sizes, right-hand threadigus 20.07.2021