KBK/BAA - Safety Couplings with 2 Outer Cones - KBK Antriebstechnik

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9

		LINA Bill of material	SIZE Size ⁿ/ₐ	D Outer Diameter [mm]	D3 Hub Diameter [mm]	S Disengagement Travel [mm]	F Screw (ISO 4017) ⁿ/ₐ	TA Tightening Torque [Nm]	CNSMASSEXACT Mass [kg]	J Moment of Inertia [kg cm²]	CT Torsional Spring Stiffness CT [Nm/rad]	CR Radial Spring Stiffness [N/mm]	CA Axial Spring Stiffness [N/mm]	KR Misalignment radial max. [mm]	KA Misalignment axial max. [mm]	KW Misalignment angular max. [°]	RPM Speed max. [1/min.]

		KBK/BAA-30-78-12-12-5Nm-C...	30	64	56	1.2	M5	5.9	0.74	3.0	38000	720	50	0.15	0.6	1.5	9540
		KBK/BAA-60-97-15-15-12Nm-...	60	79	66	1.2	M5	8.7	1.41	8.6	75000	1150	90	0.15	0.6	1.5	8180
		KBK/BAA-80-116-20-20-15Nm...	80	94	82	2.0	M6	15.0	2.60	23.0	128000	1200	80	0.20	0.5	1.5	6220
		KBK/BAA-150-116-20-20-50N...	150	94	82	2.0	M6	15.0	2.60	23.0	155000	2020	145	0.20	0.5	1.5	6220
		KBK/BAA-200-118-20-20-30N...	200	109	90	2.0	M6	15.0	2.90	35.0	175000	2500	147	0.20	0.5	1.5	5720
		KBK/BAA-300-141-25-25-60N...	300	119	110	2.0	M8	25.0	4.60	70.0	502000	6300	280	0.20	0.5	1.5	5200
		KBK/BAA-500-159-35-35-80N...	500	129	122	2.0	M8	36.0	6.80	121.0	690000	7790	100	0.20	0.5	1.5	4470
		KBK/BAA-800-250-50-50-240...	800	169	158	2.0	M12	85.0	17.70	514.0	700000	500	185	0.20	0.8	1.8	3350
		KBK/BAA-1400-250-50-50-36...	1400	169	158	2.0	M12	115.0	17.80	516.0	1270000	700	275	0.00	0.8	1.8	3350

Additional Information

Users who viewed this, were also interested in

DryLin® E - Stepper Motors - NEMA34 - Stepper Motors

DryLin® E - Stepper Motors - NEMA34 - Stepper Motorsigus 12.09.2022

EALM HT - Metric sizes, left-hand thread, High Temperature

EALM HT - Metric sizes, left-hand thread, High Temperatureigus 19.01.2021

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperature

EFOM HT - Metric sizes, with 2 Mounting Holes, High temperatureigus 19.01.2021

EFOM - Metric sizes, with 2 Mounting Holes

EFOM - Metric sizes, with 2 Mounting Holesigus 19.01.2021

DryLin® TK-04 - Miniature | mm

DryLin® TK-04 - Miniature | mmigus 08.09.2022

XUM-01 - Liner, closed, long design, high temperature

XUM-01 - Liner, closed, long design, high temperatureigus 20.07.2021

OQA - Quad Block, open, mm

OQA - Quad Block, open, mmigus 12.09.2022

FJUMT-02 - Tandem Flange, square, mm

FJUMT-02 - Tandem Flange, square, mmigus 12.09.2022

KSTI - Inch sizes

KSTI - Inch sizesigus 19.01.2021

KGLM LC - Metric sizes, Low-Cost

KGLM LC - Metric sizes, Low-Costigus 20.07.2021

DryLin® ZLW-0630-OD - Belt Drive

DryLin® ZLW-0630-OD - Belt Driveigus 12.09.2022

FJUM-01 - Round Flange, mm

FJUM-01 - Round Flange, mmigus 12.09.2022

KBK Antriebstechnik

KBK/EKI - Safety Coupling with Collet Clamp and Inner Cone

KBK/EKI - Safety Coupling with Collet Clamp and Inner ConeKBK Antriebstechnik 26.11.2019

N 27 - Low-Profile Linear Guideigus 08.09.2022